1. OEM MR491774 Key Details
-
Compatibility:
-
Mitsubishi Pajero Montero III (1999–2007)
-
Engine Models: V78, V68, 4M41 Diesel
-
-
Technical Specifications:
-
Pressure Range: 1,200–1,500 PSI
-
Flow Rate: 2.5–3.0 L/min
-
Material: High-strength cast aluminum housing, corrosion-resistant seals
-
-
Certifications: ISO 9001 compliant, meets JIS D0105 hydraulic standards
2. Symptoms & Solutions for Failure
-
Common Issues:
-
Whining Noise: Low fluid levels or worn bearings.
-
Stiff Steering: Faulty pressure valve or damaged internal gears.
-
Fluid Leaks: Degraded seals (replace with Viton seals).
-
-
Emergency Actions:
-
Check power steering fluid immediately to prevent dry operation.
-
If leaks persist, stop driving and consult a professional.
-
Step-by-Step Installation Guide
Tools Needed: 14mm socket, torque wrench, Dexron III fluid, seal kit.
-
Remove Old Pump:
-
Relieve belt tension, disconnect hoses (use a drain pan).
-
Unbolt the pump (note pulley alignment).
-
-
Install New Pump:
-
Clean mounting surface, apply sealant (Loctite 518).
-
Tighten bolts to 20–25 Nm, reconnect hoses.
-
-
Bleed & Test:
-
Refill fluid to MAX line, start the engine, and turn steering wheel lock-to-lock 3 times.
-
Top up fluid and check for leaks/noise.
-
5. Maintenance Tips for Longevity
-
Routine Care:
-
Replace fluid every 2 years/60,000 miles (use Idemitsu PSF-3).
-
Inspect belts for cracks/slack (tension: 80–100N).
-
-
Seasonal Advice:
-
Use low-viscosity fluid (e.g., ATF Dexron VI) in winter to reduce cold-start wear.
-
6. Frequently Asked Questions (FAQ)
Q1: Does MR491774 fit 2008+ Pajero models?
→ No. Compatible only with 1999–2007 models. Post-2008 models require MR512345.Q2: How durable are refurbished pumps?
→ Professionally rebuilt pumps (pressure-tested) last 5–7 years, offering better value than aftermarket parts.Q3: Noise persists after installation. Why?
→ Air may remain in the system. Re-bleed or check for air leaks in hoses.
-
-