The OEM 56500-3X200 and 56500-3X001 Power Steering Racks are engineered for Hyundai Elantra models produced between 2012–2015 (sixth generation, codenamed MD/UD). Designed to address common failures like steering stiffness and fluid leakage, these hydraulic racks feature SAE 1045 carbon steel construction, triple-lip Viton seals, and ISO/TS 16949:2009 certification. Validated under 1,200 PSI pressure and extreme temperatures (-30°C to 120°C), they restore factory steering performance for both base and high-mileage Elantras.
Restore precise steering for Hyundai Elantra (2012–2015) with OEM 56500-3X200/3X001 Power Steering Racks. ISO-certified direct fit, leak-proof seals, and 1-year warranty.
Power Steering rack OEM NO.:56500-3X200 56500-3X001 for Hyundai Elantra 2012-2015
Product Overview
-
OEM Fitment:
✅ Hyundai Elantra 2012–2015:- Sixth Generation (MD/UD): Compatible with 1.6L Gamma MPi (128 HP) and 1.8L Nu MPi (148 HP) engines.
-
Validated for FWD configurations in North American and Asian markets
.12
-
Key Features:
✅ Hydraulic Steering System: Precision valve bodies tested under 1,200 PSI pressure, ensuring compatibility with Hyundai Genuine PSF fluid.
✅ Leak-Proof Design: Triple-lip Viton seals prevent fluid leakage, addressing a common failure in high-mileage Elantras (e.g., 2013–2014 models).2
✅ Legacy Vehicle Support: Targets aging Elantras still prevalent in markets like the U.S. and Southeast Asia, where sixth-generation models account for 15% of active Elantra registrations.1
Technical Specifications
| Parameter | Details |
|---|---|
| OEM Part Numbers | 56500-3X200, 56500-3X001 |
| Material | SAE 1045 Carbon Steel (phosphate-coated) |
| Fluid Compatibility | Hyundai Genuine PSF or equivalent |
| Torque Specs | Mounting Bolts: 48 ft-lbs (65 Nm) |
| Pressure Rating | 1,200 PSI (tested) |
Why Choose These Steering Racks?
-
Address Common Failures:
-
Steering Stiffness: Replaces worn valve bodies and seals, restoring factory steering effort—critical for sixth-gen Elantras known for accelerated mechanical decay
.1
-
Fluid Leaks: Viton seals mitigate leakage issues prevalent in models over 100,000 km
.2
-
Steering Stiffness: Replaces worn valve bodies and seals, restoring factory steering effort—critical for sixth-gen Elantras known for accelerated mechanical decay
-
Broad Compatibility: Supports both 1.6L Gamma and 1.8L Nu engines, covering 95% of sixth-gen Elantra variants
.1
- Cost-Effective Repair: Priced 30–35% lower than dealership parts, with bulk discounts for repair shops (MOQ 10 units).
-
Installation Guide
-
Tools Required:
- 17mm flare nut wrench (hydraulic lines).
- Power steering fluid transfer pump.
-
Critical Steps:
-
Bleed the System: Follow Hyundai’s service manual to eliminate air pockets
.2
- Fluid Selection: Use only Hyundai Genuine PSF to avoid seal degradation.
-
Bleed the System: Follow Hyundai’s service manual to eliminate air pockets
FAQ
Q: Does this fit the 1.8L Nu engine?
A: Yes! Both part numbers are validated for 1.8L Nu MPi engines in 2012–2015 Elantras.1Q: Can synthetic power steering fluid be used?
A: No—strictly use Hyundai Genuine PSF to prevent seal degradation.2Q: Are these compatible with AWD systems?
A: Sixth-gen Elantra models are FWD-only; no AWD variants exist.
Call to Action (CTA):
Restore Factory Steering Performance Today!
✅ 1-Year Warranty ✅ ISO-Certified Quality ✅ Bulk Order Discounts -
Tools Required:
